The BOSS™ Passive Fire Protection Range

Fire Collars

• New patented fast expanding graphite material
• Collars comes in two different heights for different fire classificatons to maximize cost efficiency
• Smaller pipes can be filled within larger collars with the benefit of accommodating pipes that are at an angle or if the opening around the pipe is too large
• Fire classifications up to 240 minutes for both integrity and insulation*
• Certified for PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS, SAN+PVC and PP pipes
• Tested and certified for U/U pipe end applications
• No emissions - environmentally and user friendly
• Simple to install using widely available standard screws
• Unlimited storage time (under correct conditions)
• 30 years working life guarantee

Fire Wraps

• For plastic pipe sizes from smallest pipes available to Ø400 mm in a range of pipe wall thicknesses
• For metal pipes with continuous combustible pipe insulation
• For plastic pipes with cables (conduits)
• Pipe wraps come in two types; pre- made for most diameters, and in 25 metre rolls for all diameters
• Fire classifi cations up to 240 minutes for both integrity and insulation
• Certified for PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS, SAN+PVC and PP pipes
• Tested and certifi ed for U/U pipe end applications
• Classified for fire seals in all types of construction.
• Excellent sound insulation.
• No emissions - environmentally and user friendly
• Simple to install in both FR Board and EX Mortar
• Unlimited storage time (under correct conditions)
• 30 years working life guarantee

Acrylic Mastic

• High end formula, certified Worldwide
• Classified for fire sealing all types of constructions and building service penetrations
• Very high sound insulation
• Low emissions - environmentally and user friendly
• Simple to apply with a smooth surface fi nish
• Permanently flexible – will accommodate movement up to 12.5%
• No priming needed for most materials
• Suitable for most surfaces, included concrete, masonry, steel, gypsum, glass, plastics and most non-porous surfaces
• Hardens quickly, tack free aft er 1 hour (the fire performance specification of the joint filler has been derived when the joint filler has been let to
• cure for a month)
• 18 months storage time (under correct conditions)
• 30 years working life

Fire Boards

• Classified for all types of constructions with or without building service penetrations
• Simple and very quick to install
• Easy to retrofit additional building services after instal
• Permanently flexible - will accommodate movements during fire and small movements within the construction.
• Suitable for most surfaces, including concrete, bricks, masonry, steel, wood, gypsum, glass, plastic and most non-porous surfaces
• May be used in unlimited lengths in walls with heights up to 1200 mm and in fl oors with widths up to 800 mm.
• May be installed in gypsum walls with or without framing around the opening
• Halogen free with added fungicides
• Resistant to UV, humidity and frost when fully cured
• PYROKOOL Board can be supplied with a smooth surface

Ex Mortar

• Classified in walls and floors of concrete, brick, gypsum etc.
• Suitable for cables, bundled cables, cable racks, cable trays, steel, copper, alupex, plastic pipes and air ventilation ducts
• Simple to apply leaving a very smooth fi nish
• High degree of mechanical resistance; the seal is load bearing without reinforcement
• No priming necessary prior to application in most building material substrates however metal services in contact with the seal must be corrosion protected
• Suitable for most surfaces, included concrete, bricks, Leca, steel, plastic etc, but not suitable to fi tting of doors or in service openings that involve movement
• The product is certifi ed for use in walls but it is recommended to use PYROKOOL Boards for these applications
• Fully set within 1 hour
• The fire performance specifi cation of the compound has been derived when the seal has been left to cure for 1 month
• Nearly unlimited storage time